How To Check Heating Element In Air Fryer- Guide

Learn how to check the heating element in air fryer with expert tips and troubleshooting techniques. Discover easy steps to ensure your air fryer is working efficiently.

In the realm of modern culinary marvels, the air fryer stands tall as a beacon of convenience and crispiness, revolutionizing the way we approach frying without the guilt of excessive oil.

However, even the most efficient kitchen gadgetry can face its trials, and when the savory aromas start to dwindle or the crispness begins to wane, it’s time to embark on a quest to troubleshoot the heart of this miraculous machine—the heating element.

Unlocking the mystery behind the air fryer’s heating element isn’t just about fixing a glitch; it’s about preserving the essence of perfectly golden fries, succulent chicken wings, and all those delectable delights that make the air fryer a countertop hero.

So, let’s dive into the realm of appliance anatomy and unravel the secrets of how to check the heating element in your air fryer, ensuring your culinary adventures remain crisp, flavorful, and utterly satisfying.

How To Check Heating Element In Air Fryer

Table of Contents

How To Check Heating Element In Air Fryer

Checking the heating element in an air fryer is essential for ensuring it’s functioning properly. To do so, you’ll need to perform a visual inspection and test for continuity using a multimeter.

Step – Wise Step Heating Element Checking Process:

Here is a step-by-step guide for checking the heating element in your air fryer:

Turn Off and Unplug the Air Fryer:

Before inspecting or working on the air fryer, ensure that it is completely powered off and unplugged from the electrical outlet. This is crucial for your safety.

Access the Heating Element:

Depending on the design of your air fryer, you may need to remove the cooking basket, trays, or any other components to access the heating element. Refer to the user manual for specific instructions on accessing the heating element for your model.

Visual Inspection:

Carefully examine the heating element for any signs of damage, such as discoloration, burn marks, or visible breaks or cracks. Pay close attention to the wiring and connections as well. If you notice any damage, the heating element may need to be replaced.

Test for Continuity (Optional):

If you have a multimeter or continuity tester, you can perform a continuity test to check if the heating element is functioning properly.

Set the multimeter to the continuity or ohms setting and touch the probes to each end of the heating element.

If the multimeter displays a reading close to zero ohms, it indicates that the heating element has continuity and is functioning correctly.

If there is no reading or a very high resistance, it suggests that the heating element is faulty and may need to be replaced.

Reassemble and Test:

Once you’ve completed the inspection or testing, reassemble the air fryer and plug it back in. Turn on the appliance and run a test cycle to ensure that the heating element is heating up properly and that the air fryer is functioning as expected.

Contact Professional Help (if needed):

If you’re unsure about how to perform these steps or if you’re uncomfortable working with electrical components, it’s best to consult a qualified technician or contact the manufacturer for assistance.

Attempting repairs without the necessary knowledge or experience can be dangerous and may void the warranty on your air fryer.

By following these step-by-step instructions, you can effectively check the heating element in your air fryer to determine if it’s functioning properly or if it requires replacement.

How To Fault Trace On A Small Appliance Using A Multimeter

Fault tracing on a small appliance using a multimeter involves identifying and testing various components to pinpoint the source of the problem. Here’s a general guide on how to fault trace on a small appliance using a multimeter:

Identify the Problem:

Start by identifying the specific issue with the small appliance. For example, if the appliance isn’t turning on, overheating, or malfunctioning in some way, try to determine the symptoms and potential causes.

Safety First:

Before proceeding with any testing, ensure that the appliance is unplugged from the power source to avoid electric shock or injury.

Inspect the Wiring and Connections:

Visually inspect the wiring, connections, and components of the appliance for any signs of damage, such as frayed wires, loose connections, or burnt areas. Address any visible issues before proceeding.

Select the Proper Setting on the Multimeter:

Set the multimeter to the appropriate setting for the type of testing you’ll be performing. For continuity testing, select the continuity or ohms setting. For voltage testing, select the voltage setting suitable for the voltage level of the appliance.

Test for Continuity:

Use the multimeter to test for continuity in the electrical circuits of the appliance. This involves touching the probes of the multimeter to different points in the circuit to check if electricity can flow freely.

If there is continuity (a low resistance reading), it indicates that the circuit is complete. If there is no continuity (a high resistance reading), there may be a break or fault in the circuit.

Test Voltage:

If the appliance is not functioning properly, use the multimeter to test for voltage at various points in the circuit. This can help identify if there is power reaching the components as expected.

Test Components:

If specific components, such as switches, motors, or heating elements, are suspected to be faulty, test them individually using the multimeter. Check for continuity or resistance to determine if the component is functioning correctly.

Interpret Results:

Analyze the readings from the multimeter to determine if any faults or issues are present. Compare the readings to the expected values for the appliance’s components to identify abnormalities.

Repair or Replace Faulty Components:

Based on the results of your testing, repair or replace any faulty components or wiring identified during the fault tracing process.

Test the Appliance:

Once repairs or replacements have been made, test the appliance again to ensure that the issue has been resolved and that the appliance is functioning properly.

By following these steps and using a multimeter for testing, you can effectively fault trace on a small appliance to identify and resolve issues with its electrical components.

Remember to exercise caution and follow safety precautions when working with electrical appliances and equipment. If you’re unsure about any aspect of the fault tracing process, consider consulting a qualified technician or electrician for assistance.

Common Issues With The Heating Element In The Air Fryer

Common issues with the heating element in an air fryer can affect its performance and cooking capabilities. Here are some typical problems associated with the heating element:

Uneven Heating:

One of the most prevalent issues is uneven heating, where certain areas of the air fryer may become hotter than others. This can result in uneven cooking or browning of food.

Failure to Heat:

If the heating element fails to heat up at all, it can prevent the air fryer from cooking food properly or not cooking it at all. This may be due to a malfunctioning heating element or issues with electrical connections.

Slow Heating:

Another common problem is slow heating, where the air fryer takes longer than usual to reach the desired temperature. This can extend cooking times and affect the overall cooking experience.

Overheating or Burning Smell:

If the heating element overheats or becomes too hot, it may emit a burning smell or produce smoke. This can be a safety hazard and may indicate a problem with the element or its controls.

Damage or Corrosion:

Physical damage to the heating element, such as bending, warping, or corrosion, can affect its performance and longevity. Damaged elements may not distribute heat evenly or may fail prematurely.

Electrical Issues:

Problems with electrical connections, wiring, or components associated with the heating element can also lead to performance issues. Loose connections, short circuits, or faulty components may need to be repaired or replaced.

Build-up of Residue:

Over time, residue from cooking oil, food particles, and seasoning may accumulate on the heating element, affecting its ability to generate heat efficiently.

Regular cleaning and maintenance are essential to prevent buildup and ensure optimal performance.

Thermal Fuse Failure:

Some air fryers are equipped with thermal fuses that shut off power to the heating element if it overheats. If the thermal fuse fails, it can prevent the heating element from functioning properly and may require replacement.

If you encounter any of these issues with the heating element in your air fryer, it’s essential to address them promptly to ensure safe and effective operation.

Depending on the severity of the problem, you may need to clean, repair, or replace the heating element or other associated components.

Always refer to the manufacturer’s instructions and safety guidelines when performing maintenance or repairs on your air fryer.

If you’re unsure about how to proceed or if the issue persists, consider contacting the manufacturer’s customer support or seeking assistance from a qualified technician.

How To Check Heating Element In Air Fryer

Frequently Asked Questions (FAQ) about “How To Check Heating Element In Air Fryer”

What signs indicate a faulty heating element in my air fryer?

Look out for uneven cooking, longer cooking times, or if the air fryer fails to reach desired temperatures.

Can I visually inspect the heating element?

Yes, you can. Turn off and unplug the air fryer before carefully examining the heating element for any visible signs of damage such as cracks, burns, or breaks.

How can I test the heating element’s functionality?

Use a multimeter to check for continuity. Disconnect the air fryer from the power source, then carefully test the heating element’s terminals for electrical continuity. A reading of zero or very low resistance indicates the element is intact.

Are there any safety precautions I should take when checking the heating element?

Absolutely. Always ensure the air fryer is unplugged and cool before attempting any inspection or repair. Wear appropriate safety gear, and if you’re unsure, consult a professional technician.

What if the heating element appears to be intact, but the air fryer still isn’t heating properly?

In such cases, it could be a problem with the thermostat, wiring, or other components. Consider contacting the manufacturer for troubleshooting assistance or seek professional repair services.

Is it possible to replace the heating element myself?

It depends on your level of expertise and the manufacturer’s guidelines. Some air fryer models may have user-replaceable parts, while others require professional servicing. Always refer to the user manual or consult with the manufacturer for guidance.

How often should I check the heating element in my air fryer?

Regular maintenance checks are recommended, especially if you notice any issues with cooking performance or if the air fryer has been subjected to physical damage.

Can a faulty heating element be repaired, or does it need to be replaced entirely?

In most cases, a damaged heating element will need to be replaced. Attempting to repair it could pose safety risks and may not provide a lasting solution.

What should I do if I suspect a problem with the heating element but I’m not confident in checking it myself?

It’s always best to err on the side of caution. Contact the manufacturer’s customer support or a certified technician for assistance. Trying to troubleshoot complex electrical components without proper knowledge can be dangerous.

Are there any maintenance tips to prolong the lifespan of the heating element?

Avoid using abrasive cleaners on the air fryer, and always clean it according to the manufacturer’s instructions. Additionally, avoid overcrowding the basket, as this can put undue stress on the heating element and affect its performance over time.


In conclusion, ensuring the proper functioning of the heating element in an air fryer is essential for optimal cooking results and appliance longevity.

By following the steps outlined in this guide, users can effectively troubleshoot and identify any issues with their heating elements, thereby maintaining peak performance.

Regular maintenance and inspection of the heating element will not only guarantee efficient cooking but also contribute to overall safety in the kitchen.

By staying vigilant and proactive, users can enjoy the benefits of their air fryers for years to come, confidently creating delicious, healthier meals with ease.